Follow the rules for using concrete laser leveling machine to make the equipment safe and secure
September 29, 2024
Follow the rules for using concrete laser leveling machine to make the equipment safe and secure 2
If you want to use the concrete laser leveling machine better, there are some prerequisites. First of all, you need to be familiar with the structural characteristics of the concrete laser leveling machine, and abide by the rules during use, which can effectively ensure the use effect of the equipment. In order to ensure the effect and peace of mind of users when using the leveling machine, the staff will lead everyone to look at the rules that need to be followed when safely operating the concrete laser leveling machine.
◤ First of all, it is necessary to ensure that all parts of the concrete laser leveling machine are connected intact and there is no looseness to prevent problems during the operation;
◤ Add enough lubricating oil to the internal combustion frame leveling machine in advance to improve the flexibility of the controller in order to improve work efficiency;
◤ The surface insulation part of the cable must be complete, and any damaged parts must be treated with caution until they are all intact. This not only ensures the safety of the construction workers, but also the safety of people passing by.
◤ After turning on the power, it is necessary to check the direction of rotation of the motor. If an error occurs, the line must be changed immediately to avoid greater problems during work.
◤ The operators of the leveling machine must undergo professional training. During the operation, they must master the following factors, such as not tilting and not holding too tightly, so as to avoid accidents.
◤ During the construction process of the concrete laser leveling machine, the soil that needs to be dense can be compacted repeatedly in situ, and it should not be moved back and forth. In this way, even if the result is the same, more energy will be spent on moving, which is not cost-effective;
◤ So how should the laser leveling machine be used when it is used? In fact, this issue will be introduced in great detail in the product manual of the equipment, such as what is the operating procedure, what safety issues should be paid attention to when turning on and off the machine, etc. There are very detailed step-by-step instructions in the product manual. Therefore, when using the equipment, the user does not have anything to worry about. The only thing to pay attention to is that he needs to be familiar with the relevant information in the manual.
From the above-mentioned safe operation rules of the concrete laser leveling machine, it can be seen that if the production enterprise wants to develop for a long time, it is necessary not only to abide by the operating rules reflected in the above content, but also to regularly do a good job of equipment maintenance. Wanshi Machinery Technology has been engaged in the production and processing of leveling machines. It has rich experience and can meet the various needs of customers. If you are interested in this equipment, please come directly to the factory for a visit and guidance.
About the Author: Shandong Vanse Machinery Technology Co., Ltd.
Shandong Vanse Machinery Technology Co., Ltd. is a high-tech manufacturer specializing in concrete construction machinery, including laser screeds and related equipment. The company integrates R&D, production, and global sales, with products exported to over 60 countries and widely used in infrastructure projects worldwide.
What are the specific application cases of laser leveling machines in municipal engineering?
There are many specific application cases of laser leveling machines in municipal engineering. Here are some examples: 1. Highway construction: Laser leveling machines are widely used in highway construction, especially in the construction of highways and urban roads. They can help lay the road surface quickly and accurately, ensuring the flatness and stability of the road surface. 2. Municipal facility construction: Laser leveling machines can also be used in municipal facility construction, such as parking lots, squares, parks, etc. These places require large areas of concrete floors, and laser leveling machines can complete this work quickly and efficiently. 3. Subway construction: Subway construction also requires a large amount of concrete floors, so laser leveling machines are also widely used in this field. They can help lay subway platforms, tunnels and other infrastructure quickly and accurately. 4. Pipeline laying: Laser leveling machines can also be used for pipeline laying, especially the laying of large pipelines. They can help ensure the flatness and stability of pipelines and reduce the cost of subsequent maintenance. 5. Bridge construction: Bridge construction also requires a large amount of concrete floors, so laser leveling machines are also widely used in this field. They can help lay bridge panels and other infrastructure quickly and accurately. In short, laser leveling machines are widely used in municipal engineering, which can help improve work efficiency and quality, reduce construction costs, and at the same time ensure the safety and stability of project quality.
In the field of modern floor construction, efficient and precise construction technology is the key to ensuring the quality and progress of the project. As an industry-leading concrete leveling solution, Vanse Concrete Laser Leveling Machine is designed for various floor construction scenarios, such as industrial plants, warehouses, parking lots, etc., providing unprecedented construction advantages. Its core lies in the use of advanced laser technology to achieve precise control of the flatness of the concrete surface and create a perfect floor project for users. (I) Laser emission and reception The laser transmitter equipped with Vanse laser leveling machine can be installed on a stable reference point to emit a horizontal laser beam to the construction area to form an accurate plane reference. Whether it is a rotating or fixed laser transmitter, it can be flexibly selected according to the size and shape of the construction site to ensure that the horizontal accuracy can reach ±0.5mm/10m. It uses 635nm or 650nm visible red light wavelengths that are safe for human eyes, which is convenient for construction personnel to observe and calibrate. The power range is 5mW-10mW, which meets the signal strength requirements within the construction range. At the same time, the laser receiver on the leveler can receive laser signals in real time, providing accurate data for subsequent automatic control. (II) Automatic control and feedback When the laser receiver detects that there is a deviation between the position of the leveler scraper and the laser plane, the advanced control system of the Vanse laser leveler begins to play a role. The system adopts PLC (programmable logic controller) or microcomputer control system, with automatic control, manual adjustment and fault diagnosis functions, and uses advanced PID (proportional-integral-differential) control algorithm to automatically adjust the height of the scraper according to the deviation signal. The scraper is driven up or down by the hydraulic system to keep the scraper on the laser plane at all times, thereby ensuring that the flatness error of the concrete surface is controlled within a very small range. (I) Laser transmitter 1. Type: Two options are available: rotary and fixed to meet the needs of different construction sites. 2. Accuracy: The horizontal accuracy is as high as ±0.5mm/10m, ensuring that the emitted laser plane is highly accurate. 3. Laser wavelength: 635nm or 650nm visible red light is used, which is safe for human eyes and convenient for construction operation. 4. Power: 5mW – 10mW, to ensure the signal strength within the construction range. (II) Laser leveling machine 1. Scraper system – Scraper material: The use of high-strength wear-resistant alloy materials, such as high-chromium alloy, greatly guarantees the wear resistance and service life of the scraper, reduces the replacement frequency, and reduces the cost of use. – Scraper length and width: Length 2 – 5m, width 0.5 – 2m, can cover a larger area of concrete surface, improve construction efficiency. – Scraper adjustment range: The vertical adjustment range is 0 – 30cm, which is suitable for concrete construction of different thicknesses. 2. Walking system – Walking mode: Two walking modes are provided: crawler and wheeled. The crawler is suitable for complex terrain and soft ground, and the wheeled walking speed is faster. Users can freely choose according to the conditions of the construction site. – Travel speed: It can be adjusted within the range of 0 – 1.5m/s, and the operator can flexibly adjust it according to the slump of concrete and construction requirements. – Drive motor power: According to the weight of the whole machine and the travel resistance, the motor power is 5 – 20kW to ensure that the leveling machine can walk stably on the concrete. 3. Hydraulic system – Hydraulic pump type: A variable piston pump is selected, which can automatically adjust the output according to the system pressure and flow requirements, improve the efficiency of the hydraulic system, and reduce energy consumption. – Hydraulic cylinder parameters: The stroke and thrust of the scraper lifting cylinder meet the scraper adjustment requirements, and the working pressure is 10 – 20MPa. – Hydraulic oil cooling method: Air-cooled or water-cooled cooler to ensure that the hydraulic oil temperature is within the normal working range and prevent the oil temperature from being too high to affect the system performance. 4. Laser receiver and control system – Laser receiver accuracy: It can accurately detect the laser plane deviation of ±1mm, providing guarantee for high-precision leveling. – Control system type: It adopts advanced PLC or microcomputer control system with powerful functions. – Control algorithm: Equipped with advanced PID control algorithm, it can quickly and accurately adjust the scraper height to ensure leveling accuracy. (I) Construction preparation 1. Site cleaning: Clear the debris, dust and obstacles in the construction site, check and repair the base layer, ensure that the base layer flatness error is within ±10mm, and lay a good foundation for subsequent construction. 2. Laser transmitter installation and calibration: According to the size and shape of the construction site, select a suitable installation location, use tools such as a level to accurately calibrate the Vanse laser transmitter to ensure that the laser plane meets the design requirements. 3. Material preparation: Prepare concrete raw materials that meet the design requirements, and check their quality and slump (generally controlled at 12-18cm). (II) Concrete pouring and leveling 1. Concrete pouring: Pour the concrete evenly in the construction area. The pouring method can be divided into compartments. The area of each compartment should not exceed 500 square meters. Use a vibrator to vibrate the concrete while pouring. The vibration interval should not exceed 50cm. 2. Leveling machine start: After the concrete is initially vibrated, start the Vanse laser leveling machine (concrete leveling machine) and drive it to the poured concrete area. 3. Leveling operation: The operator controls the travel speed and scraper height of the leveling machine according to the signal of the laser receiver, so that the scraper moves along the laser plane to level the concrete. During the leveling process, pay attention to the flatness of the concrete surface and the working status of the scraper, and adjust the travel speed and scraper height in time. (III) Quality inspection and subsequent treatment 1. Flatness inspection: Use tools such as a level and a 2m ruler to check the flatness of the leveled concrete surface. The flatness error within every 2 square meters should not exceed ±2mm. If uneven areas are found, local repairs should be made in time. 2. Surface treatment: According to construction requirements, surface finishing and roughening can be performed in the initial setting stage of concrete to improve the quality and aesthetics of the concrete surface. 3. Maintenance: After leveling, the concrete should be maintained in time. Plastic film can be covered, curing agent can be sprayed, etc., and the maintenance time should not be less than 7 days. (I) High precision Compared with traditional leveling methods, Vanse concrete laser leveling machine can achieve higher flatness. Its advanced laser technology and precise control system can meet the construction needs of industrial plants, precision instrument workshops and other places with strict requirements on ground flatness, ensure that the ground flatness error is extremely small, and provide a high-quality foundation for subsequent production and use. (II) High efficiency The automated leveling process reduces the time and error of manual operation and greatly improves construction efficiency. The large area coverage and adjustable walking speed of the scraper greatly shorten the construction period, reduce labor costs and time costs, and bring higher economic benefits to users. (III) Strong adaptability Vanse laser leveling machine can adapt to different types of concrete and construction site conditions. Whether it is a large or small area, flat or with a certain slope, it can guarantee a good leveling effect. The choice of crawler and wheeled walking methods, as well as the flexible adjustment of the scraper system, enable it to cope with various complex construction environments. (IV) Reliable quality The equipment adopts high-quality materials and advanced manufacturing processes, and the performance of each component is stable and reliable. The high precision of the laser transmitter and receiver, as well as the intelligent control system, ensure the stability and consistency during the construction process, and provide a solid guarantee for the quality of the flooring project. (I) Quality Control 1. Equipment Calibration: Regularly calibrate the laser transmitter and the laser receiver and control system of the leveling machine to ensure that the equipment accuracy is always maintained at a high standard, providing a guarantee for the construction quality. 2. Construction Process Monitoring: During the construction process, arrange a dedicated person to be responsible for quality inspection, monitor the slump of concrete, the working parameters of the leveling machine and the flatness of the ground after leveling in real time, and deal with problems in a timely manner to ensure that the construction quality meets the requirements. (II) Equipment Maintenance 1. Daily Maintenance: After the construction is completed, clean up the concrete residue on the leveling machine in time, check the wear of the scraper, walking system, hydraulic system and other components, lubricate the equipment and tighten the bolts and other maintenance work to extend the service life of the equipment. 2. Regular maintenance: According to the use time and working intensity of the equipment, the Vanse laser leveling machine should be regularly overhauled, the severely worn parts should be replaced, and the hydraulic oil and lubricating oil should be replaced to ensure the stable performance of the equipment and always maintain good working condition. If you are looking for a high-quality concrete laser leveling machine for sale, the Vanse concrete laser leveling machine is undoubtedly your best choice. We offer reasonable prices and meet your construction needs with excellent performance and high-quality services. At the same time, our equipment is also equipped with an efficient concrete leveling vibrator to further improve the construction effect. Choosing Vanse means choosing an efficient, accurate and reliable floor construction solution.
Read More
October 23, 2024
The secret of Shandong Vanse laser leveling machine’s hot sales
According to analysis, in 2017, Shandong Vanse Machinery's concrete laser leveling machine sales market share was four layers, and the turnover ratio was three layers, which is unmatched by any other leveling machine at present. What is the reason why the concrete laser leveling machine is so popular with customers? Today we will analyze the "tellable" secret behind the hot sales of laser leveling machines. Concrete laser leveling machine is used for large-area floor concrete construction. The ground elevation is easy to control and the ground flatness error is extremely small. Because of the use of laser point-to-point, the entire floor only needs 1-2 accurate point elevations, which can reduce the error caused by multiple accurate points; Laser transmitters are arranged independently, and the floor elevation is always controlled by the plane formed by the rotating light beam emitted by the laser transmitter. As long as the laser transmitter is not disturbed, no matter where the concrete laser leveling machine goes, it can ensure that the overall elevation of the paved ground is not affected, so that large-area one-time paving can be achieved in floor construction, and the levelness and flatness of the entire floor can be guaranteed; Concrete laser leveling machine uses laser measurement and control system to control the elevation in real time. There is no need to pull control lines for leveling, and there is no need to support side templates in the middle to control the ground elevation, thus avoiding the elevation error caused by the vibration of the template (channel steel) during the construction process, and also reducing the elevation error caused by traditional manual block support. Concrete laser leveling machine, applied to floor construction, is very easy to achieve one-time overall paving of large-area floor. This paving technology can be divided into blocks as needed, and the whole floor can be completed continuously (see Figure 7 for block construction diagram), making the ground integrity better, which is impossible to achieve with traditional construction technology. Traditional construction technology, one day of formwork and one day of concrete pouring, can only be skipped one by one, which has great limitations, cannot be operated continuously, and has poor integrity, which easily causes cumulative errors in construction joints. When leveling the concrete, the concrete laser leveling machine is always in a uniform speed construction state, with a high-frequency vibrator of 4000 times per minute, so that the vibration plate of the leveling head produces uniform high-frequency vibration, making the concrete floor more dense and uniform. Concrete laser leveling machine is used in large-area floor construction, and the operation efficiency is greatly improved. A construction team of about 6 workers can complete 300 square meters of paving work per hour, and an average of 2500-3500 square meters can be completed in a single shift. It is particularly suitable for projects with tight schedule requirements, large paving areas, and high quality requirements. In large-area floor construction, the number of workers in the traditional manual construction team is about 15, and the workload completed in a single shift is about 700 square meters. Concrete laser leveling machine is a hand-held type that can be operated. It is used in concrete floor construction, which changes heavy physical labor into mechanical paving, vibration, leveling, slurry lifting, and plastering, which greatly reduces the number of operators and greatly reduces labor intensity. The realization of large-area one-time paving construction makes it unnecessary to support the formwork in the middle of the block. While reducing the formwork and channel steel, it also further reduces the construction process and speeds up the construction progress. Concrete laser leveling machine is used in large-area floor construction. While reducing construction joints, it can also effectively solve the problems of hollowing, peeling, cracking and inequality on the ground, greatly reducing the later maintenance cost of the floor. Shandong Vanse Machinery Co., Ltd. has always been committed to the principle of "taking customer interests as the premise, leading in technology, operating with integrity, and creating a well-known brand". It has been highly recognized and praised by customers. The company has been awarded many honorary titles such as contract-abiding and credit-worthy unit and high-tech enterprise. If you need laser leveling machines, please visit our company for negotiation.
Read More
Online now. Replies personally on WhatsAppFionaCustomer specialist
Hi! I am here to help you find the right solution for your project.
You can share your product, capacity, or project needs. Our specialist will help you work out the next step.
Would you like a quick answer? Tap below to speak directly with our specialist on WhatsApp.