Technical Knowledge
Maintenance Points Of ‘Special’ Parts Of Concrete Laser Leveling Machine
July 17, 2023

Every piece of equipment must be maintained after use, and the concrete laser leveling machine is no exception. The maintenance work seems simple, but in fact it also hides a big mystery. If the maintenance method is suitable for this equipment, it will If it is effective, if it is not suitable, such maintenance will be in vain, and it will not play a big role at all. Let's take a closer look at the main points of equipment maintenance.
1. The connection between the supercharger of the concrete laser leveling machine and the intake and exhaust pipes must be tight without air leakage. If there is air leakage between the exhaust pipe and the exhaust gas turbine, the efficiency of the supercharger will be greatly reduced, and the exhaust temperature of the diesel engine will decrease. The rapid rise will damage the valve and supercharger. Before starting a new engine, the supercharger and supercharger oil filter must be filled with clean oil to ensure that the supercharger bearings can be lubricated as soon as the diesel engine starts. After the car has traveled 8000-10000km, the filter element of the turbocharger oil filter must be replaced.
2. Before stopping the diesel engine of the concrete laser leveling machine, it should run at idle speed for 3 to 5 minutes to reduce the speed and temperature of the supercharger, and monitor the sound of the supercharger running. If any abnormality is found, it should be stopped for inspection, such as The rotor of the supercharger does not rotate flexibly and has stagnation or wear sound, so it must be sent to a qualified service station for repair.
3. After the concrete laser leveling machine works for 500 hours or 30,000km, check the gap on the rotor shaft of the turbocharger, and remove the dust and carbon deposits on the turbine shell and rotor blades of the compressor. At this time, the turbocharger Remove it from the diesel engine and replace the metal gasket between the exhaust pipe of the supercharger. It is not allowed to use mechanical methods to remove the scale on the rotor parts, but to use gasoline or other cleaning fluids for cleaning aluminum parts.
4. The lock nut of the supercharger compressor of the concrete laser leveling machine cannot be disassembled, otherwise the dynamic balance of the supercharger rotor will be destroyed and the supercharger will be damaged.
5. Do not damage or deform any rotating parts of the turbocharger that has been disassembled, otherwise it will affect the balance of the concrete laser leveling machine turbine, and also do not damage any rubber seals.
Thanks to All the Friends Who Support and Trust Shandong Vanse Machinery Technology Co., Ltd.
If you want to know more about Shandong Vanse Machinery Technology Co., Ltd. or have any questions, please feel free to contact us:
Our Factory
Shandong Vanse Machinery Technology Co., Ltd.
About the Author: Shandong Vanse Machinery Technology Co., Ltd.
Shandong Vanse Machinery Technology Co., Ltd. is a high-tech manufacturer specializing in concrete construction machinery, including laser screeds and related equipment. The company integrates R&D, production, and global sales, with products exported to over 60 countries and widely used in infrastructure projects worldwide.
Shandong Vanse Machinery
Leading manufacturer specializing in high-performance concrete laser screeds, telescopic arm flatwork handlers, and mechanical ride-on power trowels.
Post overview
Main PRODUCT Categories
Need Machine Guidance?
Speak directly with Shandong Vanse field specialists for tailored equipment quotes and site planning.
Contact Us TodayRelated Articles
You Might Also Like
November 25, 2025
Establishment and sharing of a troubleshooting manual for common faults of concrete laser leveling
This is a detailed plan on how to establish and share the "Common Fault Troubleshooting Manual for concrete laser leveling". It not only contains the core content framework of the manual, but also provides a full-process approach for establishing, maintaining and sharing this knowledge system. Concrete laser leveling machines are core equipment in modern floor construction, and their operational status directly affects the construction efficiency and floor quality. The establishment of a standardized troubleshooting manual aims to: Enhance efficiency: Quickly locate and resolve faults to minimize downtime. Cost reduction: Avoid major repairs due to minor malfunctions and reduce reliance on senior technicians. Unified standards: Provide a unified troubleshooting process and solutions for both new and experienced operators as well as mechanics to reduce operational errors. Knowledge inheritance: Transform the experience of master craftsmen into replicable and shareable organizational assets. Ensure safety: Standardize operations to prevent safety accidents caused by improper maintenance. (1) Core Content Framework of the manual The manual should adopt a clear, concise and easy-to-query structure. The suggested list is as follows: Cover Equipment name and model Manual version number, formulation/revision date Establish departments/personnel Part One: Safety First General Safety Regulations: All maintenance and inspection work must be carried out after power failure and pressure relief. Personal protective equipment (PPE) requirements: safety helmets, protective glasses, gloves, steel-toed shoes, etc. Safety checklist before operation: such as checking the surrounding environment of the equipment, the effectiveness of the emergency stop button, etc. Part Two: Introduction to Equipment Foundation and Working Principle Diagram of the main components of the entire machine (chassis, scraper, vibrator, laser receiver, hydraulic system, control system, etc.). A brief description of the working principle of the laser elevation control system. A brief description of the principle of hydraulic transmission. Part Three: Quick Troubleshooting Table for Common Faults (Core Part) It is recommended to use a table format, which is clear at a glance. Fault phenomenon Possible reasons Troubleshooting steps Solution Risk Warning/Remarks 1. The leveling accuracy is inaccurate The elevation remains persistently high or low 1. The elevation setting of the laser emitter is incorrect 1. Recheck the elevation of the laser emitter 1. Reset the laser elevation Before calibration, ensure that the ground is stable and the laser signal is unobstructed 2. The initial height of the laser receiver was not calibrated 2. Execute the "centering" calibration procedure for the receiver 2. Re-calibrate the receiver 3. Wear of the machine's reference surface 3. Check the wear condition of the scraper base plate 3. Replace or adjust the scraper base plate The ground shows waves or unevenness 1. The machine's walking speed is unstable 1. Check the walking motor and control system 1. Adjust to a uniform walking speed 2. Pressure fluctuations in the hydraulic system 2. Check the hydraulic oil level, filter element and pump valve 2. Replace the hydraulic oil or filter element and inspect the hydraulic components 3. The ground base is soft and uneven 3. Assess the compaction degree of the base layer 3. Handle the grassroots level 2. Vibration system failure The vibrator is not working or is weak 1. Power supply/circuit failure of the vibrator Check the fuses, circuits and switches 1. Replace the fuse and repair the circuit When repairing the circuit, be sure to cut off the power 2. The vibration motor is damaged 2. Measure the resistance of the motor 2. Replace the vibration motor 3. Blockage or insufficient pressure in the hydraulic oil circuit 3. Detect the hydraulic pressure of the vibration circuit 3. Clean the filter screen and adjust the relief valve 3. Malfunction of the walking system – Walk on one side or not at all 1. The walking track is stuck 1. Clear the debris inside the tracks 1. Clear out debris Do not force the drive to avoid damaging the components 2. Malfunction of the walking motor 2. Check the working pressure of the motor 2. Inspect or replace the motor 3. The control solenoid valve gets stuck 3. Tap or clean the solenoid valve 3. Replace the solenoid valve 4. Hydraulic system failure The system is noisy and the oil temperature is high 1. The hydraulic oil level is too low or the oil quality is incorrect 1. Check the oil level and the type of oil 1. Add or replace standard hydraulic oil Be careful not to get burned when checking the oil level while warming up the machine 2. Air enters the hydraulic pump or it is damaged 2. Exhaust and listen to the sound of the pump running 2. Tighten the oil suction pipe and replace the oil pump 3. The hydraulic oil filter element is clogged 3. Check the filter element clogging indicator 3. Replace the filter element 5. Laser system failure The receiver signal is unstable 1. The laser signal is blocked 1. Check the laser path 1. Clear the obstacles 2. The receiver sensor is dirty 2. Clean the receiver panel 2. Wipe with a soft cloth 3. Environmental disturbances (strong light, vibration) 3. Avoid interference sources 3. Adjust the position of the equipment or add a light shield Part Four: Regular Maintenance and Upkeep Plan Daily maintenance: Cleaning, checking the oil level, and inspecting the fasteners. Weekly/monthly maintenance: Replace the filter element, check the wear of the tracks, and calibrate the laser system. Quarterly/annual maintenance: Replace hydraulic oil and conduct a comprehensive inspection of key components. Part Five: Appendix Key component model table: such as hydraulic oil model, filter element model, fuse specification, etc. Service contact information: Phone numbers of the equipment manufacturer, internal maintenance supervisor, and external service engineer. Fault record sheet: It is used by operators to record the detailed situation of each fault for subsequent optimization of the manual. (2) Manual Compilation Process Establish a project team: Led by the equipment manager, the team members include: senior operators, maintenance technicians, and technical document clerks. Information collection Refer to the official "Operation and Maintenance Manual" for all the equipment. On-site interview: In-depth interviews with experienced operators and maintenance workers, documenting the "classic malfunctions" and "folk tricks" they encountered. Historical data analysis: Analyze previous maintenance record sheets to identify high-frequency fault points. Content writing and visualization The technical document clerk writes the first draft based on the collected information in accordance with the above framework. Use a lot of pictures and ICONS! In the "Possible Causes" and "Solutions" sections, attach physical photos or simple sketches as much as possible, such as "This is the filter element that needs cleaning" or "This is the location of the calibration button". Review and Verification Distribute the first draft to all operators and maintenance workers for trial use and review. Make revisions based on feedback to ensure the content is accurate and the language is easy to understand. Finalization and release: The final version of the manual (V1.0) is formed and enters the sharing process. (1) Sharing form Physical manual Make waterproof, oil-proof and durable loose-leaf manuals and place them in the cab or toolbox of each piece of equipment. Advantages: Readily available on site and does not rely on electronic devices. Disadvantages: Inconvenient to update, prone to damage or loss. Digital Manual PDF electronic version: Distributed to each employee's wechat, email or company shared disk for easy access at any time on mobile phones or computers. Enterprise internal APP/ microsite: Transform the manual content into a simple web page or embed it into the company's OA/ERP system, supporting keyword search for the best user experience. Qr code: Paste a QR code in a prominent position on each device. Scan the code to view the latest version of the electronic manual. This is a highly recommended way! (2) Management and Update Mechanism The manual is not set in stone and a dynamic update mechanism must be established. Designated person in charge: Clearly define the maintenance person in charge of the manual (usually the equipment supervisor). Establish feedback channels: Encourage all users to provide feedback on new faults or better solutions not covered in the manual in the "Fault Record Sheet" or through the wechat work group. Regular review: Every six months or once a year, the project team conducts a centralized review of the manual and updates it based on feedback and technological development. Version control: Each update requires the version number and date to be updated, and everyone should be notified through group announcements, emails, etc., to ensure that everyone is using the latest version. For physical manuals, it is necessary to collect the old versions in a timely manner and replace them with new ones. The value of a manual lies in its use. Formal kick-off meeting: Organize a brief meeting to introduce the purpose, content and access methods of the manual to all employees. Practical training: Use the manual as an essential textbook for new employees' onboarding training and conduct troubleshooting drills in combination with real equipment. Case Sharing Session: Every month, during the safety meeting or morning meeting, an operator is invited to share a case of successfully resolving a fault using the manual, and a small reward is given to stimulate enthusiasm for use. By systematically establishing a detailed and illustrated troubleshooting manual, and adopting a shared approach that combines online and offline methods, supplemented by effective management and training, this "Common Fault Troubleshooting Manual for Concrete Laser leveling Machines" is bound to transform from a mere document into a core asset that enhances team combat effectiveness and ensures equipment availability. Note: The parameters provided in this document are for reference only and are not mandatory. Due to differences in technical characteristics between different brands and models of laser levelers, please consult the manufacturer for a suitable solution before actual operation. This reference document assumes no responsibility for any issues arising from failure to follow the manufacturer's instructions.Read More
March 26, 2024
How to evaluate performance indicators of concrete laser leveling machine?
•••★••• Introduction Concrete laser leveling machine is an indispensable and important equipment in modern construction. The evaluation of its performance indicators is of great significance to ensure construction quality, improve work efficiency and reduce operating costs. This article will discuss how to comprehensively evaluate the performance of concrete laser leveling machines from aspects such as leveling efficiency, flatness accuracy, equipment stability, laser control system, energy consumption and environmental protection, ease of operation, maintenance and upkeep, and durability and lifespan. Performance. •••★••• Leveling efficiency Leveling efficiency is one of the important indicators to measure the performance of concrete laser leveling machine. When evaluating leveling efficiency, the following aspects are mainly considered: 1. Working speed: The working speed of the equipment directly affects the leveling efficiency. Generally speaking, the faster the working speed, the higher the leveling efficiency. However, it should be noted that working too fast may lead to a decrease in flatness accuracy. 2. Leveling area: The leveling area reflects the concrete surface area that the equipment can process per unit time. A larger leveling area means higher leveling efficiency. 3. Leveling thickness range: The wider the concrete thickness range that the equipment can handle, the stronger its applicability and the leveling efficiency will increase accordingly. •••★••• Flatness accuracy Flatness accuracy is an important indicator for measuring the construction quality of concrete laser leveling machines. When evaluating flatness accuracy, the following aspects are mainly considered: 1. Flatness error: The smaller the flatness error, the higher the flatness accuracy of the equipment. Generally speaking, high-precision concrete laser leveling machines can achieve lower flatness errors. 2. Flatness uniformity: Evaluating the uniformity of flatness in different areas and at different times helps to judge the stability and consistency of the equipment. •••★••• Equipment stability Equipment stability is a key factor in ensuring the continuous and efficient operation of concrete laser leveling machines. When evaluating equipment stability, the following aspects are mainly considered: 1. Equipment structure: Reasonable equipment structure can improve the stability and durability of the equipment. When evaluating equipment construction, focus on its resistance to vibration, impact, and wear. 2. Control system: A stable control system is the key to ensuring the normal operation of the equipment. When evaluating a control system, pay attention to its anti-interference ability, response speed, and fault self-diagnosis capabilities. •••★••• Laser control system The laser control system is the core part of the concrete laser leveling machine. Its performance directly affects the levelinging quality and efficiency. When evaluating the laser control system, the following aspects should be mainly considered: 1. Laser ranging accuracy: Laser ranging accuracy determines the device's ability to perceive ground height. The high-precision laser distance measurement system can achieve more accurate leveling results. 2. Laser tracking stabilizer: The laser tracks the stabilizer to maintain the accuracy of the equipment during continuous operation. The stable laser and hydrazone system can ensure that the equipment maintains high leveling accuracy during long-term operation. •••★••• Energy consumption and environmental protection With the advent of the concept of energy conservation and environmental protection, the energy consumption and environmental protection of equipment have attracted more and more attention. When evaluating the energy consumption and environmental protection of concrete laser leveling machines, the following aspects should be mainly considered: 1. Energy consumption level: Lower energy consumption level means lower costs incurred by the equipment during operation, and also helps reduce energy waste. 2. Noise level: The lower the noise generated during the operation of the equipment, the smaller the impact on the surrounding environment and operators, and the more it meets environmental protection requirements. 3. Emissions: For concrete laser leveling machines that use fuel or gas, it is also an important consideration to evaluate whether their emissions comply with relevant environmental standards. •••★••• Operation convenience Operation convenience is of great significance to improving construction efficiency and reducing labor costs. When evaluating the ease of operation of a concrete laser leveling, the following aspects should be considered: 1. Control system interface: The concise and clear control system interface helps operators quickly master equipment operation skills. 2. Operating steps: Reasonable operating steps can reduce the tediousness and mistakes during the operation and improve work efficiency. 3. Degree of automation: A higher degree of automation can reduce the skill requirements for operators and reduce the impact of human factors on construction quality. •••★••• Maintenance and maintenance Equipment maintenance and upkeep are crucial to extending equipment life and maintaining stable performance. When evaluating the maintenance and upkeep needs of a concrete laser leveling, the following aspects should be considered: 1. Maintenance cycle: A reasonable maintenance cycle can ensure that the equipment is always in good condition during operation. 2. Maintenance content: Detailed maintenance content guidance can help operators correctly maintain equipment and prevent potential failures. 3. Replacement of wearing parts: Evaluating the replacement cycle and cost of equipment wearing parts can help predict long-term operation and maintenance costs. •••★••• Durability and lifespan Durability and lifespan are important indicators for measuring the long-term performance of concrete laser leveling machines. When evaluating the durability and life of equipment, the following aspects are mainly considered: 1. Material selection: High-quality materials can improve the wear resistance and corrosion resistance of the equipment, thereby extending the service life of the equipment. 2. Manufacturing process: Exquisite manufacturing process can ensure that potential defects and hidden dangers are reduced during the manufacturing process of the equipment, and the durability of the equipment is improved. 3. Maintenance records: Understanding the equipment's maintenance records and historical faults will help evaluate the overall performance and remaining life of the equipment. •••★••• Summary To sum up, evaluating the performance indicators of concrete laser leveling requires comprehensive consideration from many aspects. By evaluating indicators such as leveling efficiency, flatness accuracy, equipment stability, laser control system, energy consumption and environmental protection, ease of operation, maintenance and upkeep, durability and lifespan, we can fully understand the performance of the equipment. Provide scientific basis for choosing a suitable concrete laser leveler. At the same time, regular maintenance and upkeep are also key measures to ensure stable equipment performance and extend service life.Read More
December 26, 2024
What should we pay attention to when using metal trowels?
– Prevent entrapment: When the metal trowel is rotating at high speed, the operator should be careful to avoid clothing, hair, fingers, etc. from getting close to the rotating trowel. Wear work clothes, tie the cuffs and hems tightly, and wear a safety helmet and protective gloves. For example, before starting the trowel, be sure to carefully check the surrounding environment to ensure that there are no debris that may be involved. – Prevent fragments from splashing: If the metal trowel is cracked or broken, the fragments may splash and injure people. Therefore, check the integrity of the trowel regularly. If there are signs of cracks or damage, stop using it and replace it immediately. At the same time, during use, maintain an appropriate safety distance and avoid standing in the direction where you may be hit by fragments. – Proper installation: When installing the metal trowel, ensure that it is firmly installed. According to the instruction manual of the trowel, use appropriate tools to install the trowel on the corresponding shaft and tighten the screws. Insecure installation may cause the trowel to loosen or fall off during operation, which will not only affect work efficiency but also cause safety accidents. – Control operating parameters: – Speed control: Operate strictly according to the rated speed of the trowel machine, and do not increase the speed at will. Too high a speed will increase the centrifugal force of the trowel blade, which may cause the trowel blade to deform and damage, and will also increase wear. For example, for most concrete trowel operations, the trowel blade speed is generally controlled at around 70-150 revolutions per minute. – Pressure control: Reasonably control the pressure of the trowel blade on the ground. If the pressure is too high, the friction between the trowel blade and the ground will be too large, which may easily cause the trowel blade to wear too quickly, and may also cause scratches or unevenness on the ground. Generally, the pressure is adjusted according to the hardness of the ground and the trowel stage (rough grinding or fine grinding). The pressure should be appropriately reduced in the fine grinding stage. – Avoid idling and excessive friction: Try to reduce the idling time of the trowel blade. When idling, the trowel blade does not contact the ground for effective operation, but its own rotation will cause wear. At the same time, during use, avoid direct friction between the trowel and hard objects such as metal, such as avoiding operation on metal structures without concrete and other ground materials to prevent damage to the trowel blade. – Timely cleaning: After each use, clean the concrete residue, dust and other debris on the trowel in time. If these debris are not cleaned in time, the friction between the trowel and the ground will increase the wear rate during the next use. You can use a brush or a high-pressure air gun to clean it. – Check the wear condition: Check the wear degree of the trowel regularly. Observe whether the edge of the trowel becomes blunt, has a gap or a large area of wear. If the edge wear exceeds a certain limit (such as wear exceeding 2-3 mm), the trowel needs to be replaced. At the same time, check the flatness of the trowel. If deformation occurs, it should be replaced or repaired in time. – Prevent corrosion: If used in an environment with chemical substances (such as acid, alkali, etc.), the trowel should be cleaned in time to prevent chemical substances from corroding the metal trowel. In addition, when storing in a humid environment, anti-rust measures should be taken, such as applying anti-rust oil.Read More


