Door-To-Door Service Concrete Floor Laser Leveling Machine

  Generally speaking, when the bleeding on the concrete surface has basically disappeared, and the concrete has reached a certain strength and can withstand the weight of the ride on power trowel machine without obvious deformation and footprints, it is a good time to use a power trowel machine for treatment. Usually within 1-3 hours after the concrete is poured, the specific time will vary depending on the concrete mix ratio, ambient temperature, humidity and other conditions. If the treatment time is too early, there is too much water in the concrete, and the concrete machinery power trowel is easy to cause bleeding and sand on the concrete surface during operation, affecting the surface quality; if the treatment time is too late, the concrete strength is too high, and the power trowel is difficult to effectively smooth the concrete surface and may damage the equipment. In actual construction, construction personnel need to judge the best smoothing time based on the specific state of the concrete on site and experience to ensure that a smooth, flat and wear-resistant concrete surface is obtained through the treatment of the concrete power trowel machine. When determining the power trowel machine use time, environmental factors also need to be considered. In a high temperature and dry environment, the moisture in the concrete evaporates quickly, and the initial setting time may be advanced. It is necessary to observe the state of the concrete surface in time and use the trowel machine as soon as possible; in a low temperature and humid environment, the initial setting time of the concrete will be prolonged, and the use of the trowel machine should be appropriately postponed to avoid affecting the smoothing effect. In addition, different power trowel manufacturers may give different suggestions on the use time of the trowel machine based on their product characteristics. Therefore, before construction , the trowel machine's instruction manual should be carefully read and adjusted according to the actual situation to ensure the best concrete surface treatment effect.   AMOUR JOINT CONCRETE LASER LEVELING MACHINE POWER TROWEL LIGHT TOWER SLIPFORM MACHINE TRACKED MINI DUMPER

The laser leveling machine plays a vital role as the main equipment for floor construction. When the summer comes, the floor construction will gradually enter the peak season, and it is very important to ensure the working condition of the equipment. High temperature construction in summer is also a test for concrete and concrete laser levelers. Do a good job in equipment maintenance and work to maximize the efficiency of the equipment.   Learning equipment maintenance is not only related to the construction quality of the floor, but also related to the service life of the concrete laser leveling machine and construction safety. Do a good job in machine maintenance and guarantee your investment. This issue brings you the summer maintenance micro-classroom of the YZ28-4S/ YZ28-4. These two equipments are two four-wheel drive YZ28-4S that been developmented by VANSE or many years. YZ28-4S concrete leveling machine. two devices follow the excellent quality of the Hummer model, and the product development habits and requirements of domestic customers are fully considered in the product development process. Therefore, in addition to the performance guarantees of these two new products, the customer operating experience has also been significantly improved. Precautions: * Avoiding the engine too hot.  Under normal circumstances, the temperature of the engine should not exceed 95°. If the temperature is too high, you should choose a cooler position to stop the cooling. When the machine is stopped, the hood can be ventilated and cooled. *  To detect the amount of cooling water in time.   When the water radiator reaches 100°, do not rush to add cooling water. Instead, stop the engine immediately after idling and then add coolant. *  Clean the radiator timely.   Includes coolant radiator / oil radiator / hydraulic oil radiator to prevent poor heat dissipation. * The construction temperature in summer is very hot, so it's better to check the wheels air pressure and temperature. If the temperature of the wheels too hot, . If the temperature of the tire is too high, stop it in time and place it in a cool place to cool down. Avoiding  use the wrong method of deflation or cold water to cool down. *  Maintenance-free batteries need to be checked frequently for their working conditions. The observation hole shows that green represents normal. * Prevent engine knocking .Before entering the summer, the carbon deposits in the combustion chamber, valve top and other parts should be completely removed to maintain good heat dissipation and normal compression ratio; it is necessary to check and adjust the fuel supply advance angle to prevent engine deflagration. * Always check the temperature of the hydraulic oil and hydraulic transmission oil . If the temperature is too high, stop it and stop it. Do not operate at high temperatures. * In summer, the concrete solidifies at a faster speed, so it is necessary to clean the equipment in time, otherwise it will cause damage to the machine.   If yoour machine happen somethings wrong, do not worry! When choose VANSE, also choose the 100% perfect after-sales system, "zero-distance" of VANSE and our equipment, We offer 24 hours and 365 days safty after-sales, if your machine had something wrong on the working,  welcome to contact us at anywhere and anytime! Our after- sales engineer will get in touch with you at first.  

Vanse Laser Leveling Machine – Strive To Create High-End Ultra-Flat Ground With the continuous advancement of science and technology, in the construction of modern building floors, more and more things are not manually operated, but replaced by more efficient machines. For example, the laser leveling machine produced by our VANSE Machinery is a Such a machine is an excellent product to replace labor. The concrete floor poured out by VANSE Concrete Laser Leveling Machine is smooth, compact and time-saving. It can more than double the efficiency of manual laying and pouring the ground, but it greatly saves manpower. The solidity is three times that of artificial paving, making the cement floor more solid and dense. Therefore, this machine is regarded as the first choice for ground paving by many construction teams. Today, VANSE Machinery will summarize the construction advantages of concrete laser leveling machines. The biggest feature of our concrete laser leveling machines is to save labor and improve efficiency. Let's take a look at the specific and more detailed aspects: 1. High construction quality The laser leveling machine can level the ground, which can significantly improve the flatness of the ground. For the ground constructed by the laser leveling machine and the traditional method, 22 points are detected (one point every 5mx4m), and the average flatness is 1.3mm and 4.1mm respectively. Laser leveling The leveling quality of equipment such as leveling machines is more than three times higher than that of traditional methods. The laser leveling machine can realize large-scale construction, reduce a large number of construction joints, reduce the slump of concrete, and ensure the strength of concrete, so that the ground has good integrity and is not prone to cracks. 2. Fast construction speed Using laser leveling machine and other equipment to construct large concrete slabs can improve the work efficiency by 3 times compared with the traditional beam vibrator method, save 30%, and can complete 3,000 square meters per day on average. It is especially suitable for concrete surfaces with simple shapes and large surface areas. construction. 3. Reduce the amount of side formwork support and dismantling Based on the statistics of 20,000 square meters of concrete pavement, the traditional method needs to dismantle 5800m of side formwork, but with advanced equipment such as laser leveling machine, the dismantling is only 2500m, reducing the support modulus by more than 74% 4. High degree of automation and low labor intensity The use of laser leveling machines and other equipment turns heavy manual labor into mechanical paving, vibrating, leveling, slurry extraction, and surface plastering, reducing the number of operators by 30% and reducing labor intensity. 5. High economic benefit The application of laser leveling machine and other equipment saves the cost of 2-3 yuan/㎡ compared with the traditional process, with fewer seams and lower maintenance costs in the later period, so that the economic benefits are significantly improved. Advanced equipment such as laser leveling machines are especially suitable for projects such as docks, storage yards, expressways, airports, large squares, parking lots, and municipal roads that have relatively simple shapes, large amounts of action, and high construction quality requirements. Now our laser leveling machine is very mature. Customers who have bought it have used it for a period of time. During the return visit, our sales staff all said that it has been used very well. We are honored and very happy. The user's feedback that the concrete laser leveling machine is easy to use comes from their own heartfelt words. Only after using a good product can they have the most personal experience. VANSE laser leveling machine – strive to create high-end ultra-flat ground!