Technical Knowledge
Construction advantages of concrete laser leveling machine
September 18, 2023

The concrete laser leveling is an advanced construction equipment capable of providing high-precision flatness and accuracy in concrete construction. Here are a few of the main construction advantages of concrete laser levelings:
High-precision measurement and leveling:
The concrete laser leveling machine uses advanced laser technology to achieve high-precision measurement and leveling. During the construction process, the laser leveler can use the precise guidance of the laser beam and the high-precision leveling head to level the concrete surface to millimeter-level accuracy, ensuring perfect construction quality and appearance.
Fast and efficient construction:
The concrete laser leveling machine has efficient working capabilities and can complete a large amount of concrete leveling work in a short time. Due to its high-precision measurement and leveling capabilities, it can reduce the time of repeated construction and trimming, improve construction efficiency, and shorten the construction period.
Reduce manual labor intensity:
Traditional concrete leveling methods require a lot of manual labor, while concrete laser leveling machines can greatly reduce manual labor intensity. The laser leveling machine can realize automatic control, reduce human errors and mistakes, and also reduce the labor intensity of workers and improve the working environment.
Improve construction quality:
The high-precision measurement and leveling capabilities of concrete laser levelings can greatly improve construction quality. In concrete construction, flatness is one of the important factors affecting construction quality. The use of laser leveling machines can improve the consistency and accuracy of flatness, reduce the probability of quality problems such as cracks and blistering, and improve the durability and stability of concrete structures.
Versatility and flexibility:
Concrete laser levelings are versatile and flexible and can be applied to a variety of different construction environments and needs. For example, laser leveling machines can work on different surfaces such as planes, slopes, and vertical surfaces, and can also be used in various climates and environments. This flexibility and versatility enable laser leveling machines to adapt to various complex construction environments and improve construction efficiency and quality.
In short, the construction advantages of concrete laser leveling machines lie in its high-precision measurement and leveling capabilities, fast and efficient construction, reduced manual labor intensity, improved construction quality and versatility. These advantages make the concrete laser leveling machine one of the important tools in modern concrete construction, which can greatly improve construction efficiency and quality, and reduce construction costs and risks.
Thanks to All the Friends Who Support and Trust Shandong Vanse Machinery Technology Co., Ltd.
If you want to know more about Shandong Vanse Machinery Technology Co., Ltd. or have any questions, please feel free to contact us:
Our Factory
Shandong Vanse Machinery Technology Co., Ltd.
About the Author: Shandong Vanse Machinery Technology Co., Ltd.
Shandong Vanse Machinery Technology Co., Ltd. is a high-tech manufacturer specializing in concrete construction machinery, including laser screeds and related equipment. The company integrates R&D, production, and global sales, with products exported to over 60 countries and widely used in infrastructure projects worldwide.
Shandong Vanse Machinery
Leading manufacturer specializing in high-performance concrete laser screeds, telescopic arm flatwork handlers, and mechanical ride-on power trowels.
Post overview
Main PRODUCT Categories
Need Machine Guidance?
Speak directly with Shandong Vanse field specialists for tailored equipment quotes and site planning.
Contact Us TodayRelated Articles
You Might Also Like
May 6, 2024
Failure Prevention And Treatment Methods Of Concrete Laser Leveling Machine
Failure prevention and treatment methods of concrete laser leveling machine As a key equipment in modern building construction, the concrete laser leveling machine has significantly improved construction quality and efficiency due to its high efficiency and accuracy. However, any equipment will inevitably malfunction during long-term use. This article will focus on the failure prevention and treatment methods of concrete laser leveling machines, with a view to providing practical guidance for equipment operators and maintenance personnel. ☆ Common fault types and causes of concrete laser leveling machines ♢Hydraulic system failure: The hydraulic system in the concrete laser leveling machine is the core part of its work. Common failures include hydraulic oil leakage, excessive oil temperature, loud oil pump noise, etc. These failures are often caused by aging seals, oil contamination, or improper system pressure settings. ♢Electrical system failure: The electrical system controls various functions of the leveler. Common failures include sensor failure, motor failure, controller failure, etc. These failures may be caused by environmental factors (such as high temperature, humidity), circuit aging or quality problems of electrical components. ♢Laser control system failure: The laser control system is the soul of the concrete laser leveling machine and accurately controls the leveling process. Common faults include unstable laser receiver signals, laser transmitter failures, etc. These failures can be caused by dust buildup on the laser, damaged optics, or improper system calibration. ♢Mechanical structural failure: Mechanical structural failure usually manifests as leveling knife wear, track damage, bearing failure, etc. These failures are mainly caused by long-term wear and tear, overload use or lack of regular maintenance. ☆ Concrete laser leveling machine failure prevention measures ♢Regular inspection and maintenance: Regularly conduct comprehensive inspections of the concrete laser leveling, including the hydraulic system, electrical system, laser control system and mechanical structure. Replace aging parts, replace and clean the oil to ensure the normal operation of the equipment. ♢Correct use and operation: Operators should be familiar with the operating procedures and precautions of the equipment to avoid illegal operations. During use, attention should be paid to observing the operating status of the equipment, and abnormal situations should be discovered and handled in a timely manner. ♢Environmental factor control: Optimize the working environment of the equipment to avoid the impact of high temperature, humidity and other harsh environments on the equipment. At the same time, keep the area around the equipment clean to prevent debris and dust from entering the inside of the equipment. ♢Training and education: Regularly train and educate operators to improve their understanding of equipment structure and performance, and enhance their ability to judge and handle equipment failures. ☆ Concrete laser leveling machine troubleshooting methods ♢Hydraulic system fault handling: For hydraulic system faults, you should first check whether the hydraulic oil is clean and whether the seals are aging, etc. If there is any problem, the seals should be replaced in time, the oil tank should be cleaned and new oil should be replaced. Also, check that the system pressure is set correctly and adjust if necessary. ♢Electrical system fault handling: When handling electrical system faults, you should first check whether the power supply is normal and whether the circuit is aging, etc. For problems such as sensor failure and motor failure, damaged electrical components should be replaced in time. At the same time, the controller should be calibrated and maintained regularly to ensure its normal operation. ♢Laser control system fault handling: For laser control system faults, you should first check whether the laser receiver is stable and whether the optical components are damaged, etc. If necessary, the laser can be cleaned, optics replaced, or the system recalibrated. ♢Mechanical structure failure handling: For mechanical structure failures, the wear and tear of wearing parts such as leveling knives and crawler tracks should be regularly checked and replaced in a timely manner. For failures of key components such as bearings, a comprehensive inspection should be carried out and corresponding measures should be taken to deal with them. ☆ Actual case analysis Take the laser control system failure of a concrete laser leveling machine at a construction site as an example. During use, the operator found that the leveling effect was unstable, and upon inspection it was found that the laser receiver signal was unstable. After a comprehensive inspection of the laser system, it was found that dust accumulated on the surface of the laser transmitter, causing signal transmission to be blocked. After cleaning the laser emitter and recalibrating the system, the problem was resolved and the leveling effect returned to normal. ☆ Conclusion and outlook Failure prevention and treatment of concrete laser leveling machines are of great significance to the long-term stable operation of the equipment. Equipment failures can be effectively prevented through regular inspection and maintenance, correct use and operation, environmental factor control, and training and education. At the same time, appropriate handling methods are adopted for different types of faults, which can quickly solve the fault and restore the normal operation of the equipment. Looking to the future, with the advancement of technology and the continuous upgrading of equipment, the failure prevention and treatment methods of concrete laser levelings will also continue to be improved. Equipment manufacturers should continue to improve the reliability and stability of equipment and reduce the probability of failure. At the same time, construction units and operators should also strengthen their ability to prevent and deal with equipment failures to ensure efficient and stable operation of equipment during the construction process. Through joint efforts, we can further promote the widespread application of concrete laser levelings in construction and contribute to the improvement of project quality and construction efficiency.Read More
September 5, 2025
What safety precautions should I take when operating a concrete laser leveling machine?
The key to operating a concrete laser leveling machine is personal protection and equipment compliance. Risks must be avoided throughout the entire process, from pre-job preparation and operation to shutdown and closing. Particularly caution must be exercised regarding mechanical injuries and laser radiation. Personnel Qualifications: Operators must undergo professional training and hold a certificate. Unlicensed or unauthorized personnel are strictly prohibited from operating. They must be familiar with the equipment structure, operating procedures, and emergency procedures. Personal Protective Equipment (PPE): All protective equipment must be worn before operation. Hardhat: Protect against falling objects or head impacts. Non-slip work shoes: Avoid slipping on the concrete work surface. Safety glasses: Prevent concrete splashing into the eyes and reduce direct laser exposure. Reflective vest: Enhance identification at the construction site to prevent collisions with other equipment. Equipment Inspection: Before starting the machine, thoroughly inspect the equipment. If any problems are found, immediately shut it down for repair. Check that the laser transmitter and receiver are functioning properly and that the laser signal is stable to avoid accidents caused by laser deviation. Check the engine oil, fuel, hydraulic oil, and coolant levels for normal levels and leaks. Check the tires (or tracks), braking system, and steering system for flexibility and reliability to ensure safe operation. Laser Safety: The laser transmitter must be secured in a stable, unobstructed location to avoid direct exposure to the laser beam (especially the eyes). Non-operating personnel are strictly prohibited from looking directly at the laser source. If adjusting the laser equipment, the transmitter must be turned off first. Warning signs must be posted in the work area to prohibit unauthorized personnel from entering to prevent injury from equipment crushing or concrete splashing. Clear the site of any obstacles (such as rebar, pipelines, tools, etc.) to prevent equipment collisions that could cause malfunctions or accidents. Pay attention to edges and openings around the work surface. Install guardrails if necessary to prevent personnel or equipment from falling. When starting the equipment, ensure there are no people or obstacles nearby. Operate the handles slowly and avoid sudden acceleration, steering, or braking. During leveling operations, maintain a constant speed to avoid over-compacting the concrete. Monitor the laser receiver indicator to ensure accuracy and prevent loss of control. Repair, maintenance, or adjustment of working components such as the roller and scraper blades is strictly prohibited while the equipment is operating. Emergency Procedures: In the event of equipment malfunction (such as engine stalling or hydraulic failure) or an emergency (such as someone accidentally entering the work area), immediately press the emergency stop button to disconnect the equipment's power supply. Ensure personnel safety before addressing the issue. Shutdown Operations: Park the equipment on a flat, solid, and unobstructed area. Apply the parking brake, shut off the engine, and disconnect the main power supply. If the equipment is shut down for an extended period, retract the laser transmitter and store it securely. Equipment Cleaning: Clean any remaining concrete from the equipment, inspect all components for damage or looseness, and refill lubrication points to prepare for the next use. Site Cleanup: Arrange tools, remove warning signs, and ensure the construction site is clear of safety hazards before leaving. The key to operating a concrete laser leveling machine safely is to avoid taking chances before work, ensuring correct operation procedures, and ensuring proper downtime. Strictly implementing personnel protection, equipment inspections, and operating procedures can minimize mechanical injuries, laser radiation exposure, and other safety incidents, ensuring construction safety and quality. Note: The parameters provided in this document are for reference only and are not mandatory. Due to differences in technical characteristics between different brands and models of laser levelers, please consult the manufacturer for a suitable solution before actual operation. This reference document assumes no responsibility for any issues arising from failure to follow the manufacturer's instructions.Read More
June 10, 2025
Quality testing method for concrete pavement
Concrete pavement occupies a vital position in modern transportation infrastructure, and its quality is directly related to the service life, driving safety and comfort of the road. In order to ensure the quality of concrete pavement, comprehensive and scientific quality inspection is indispensable. With the continuous advancement of science and technology, advanced equipment such as concrete laser leveling machine is increasingly widely used in concrete construction, which also puts forward higher requirements for quality inspection methods. The following will introduce the quality inspection method for concrete pavement in detail. As the key cementing material of concrete, the quality of cement has a profound impact on the performance of concrete. When testing cement, the following aspects should be paid attention to: Strength: According to relevant standards, the 3-day and 28-day compressive and flexural strength of cement is measured through cement mortar strength test to ensure that it meets the design requirements. For example, for 42.5-grade ordinary silicate cement commonly used in road engineering, the 28-day compressive strength should not be less than 42.5MPa. Set time: Use a setting time meter to detect the initial and final setting time of cement. Generally speaking, the initial setting time of ordinary Portland cement shall not be earlier than 45 minutes, and the final setting time shall not be later than 10 hours, so as to ensure that the concrete has sufficient operation time during the construction process and can harden in time. Stability: The boiling method is used to test the stability of cement to ensure that the volume change of cement during the hardening process is uniform, without abnormal phenomena such as cracking, so as to avoid quality problems such as cracks in the concrete pavement due to poor cement stability. Aggregates include coarse aggregates (such as crushed stone and pebbles) and fine aggregates (such as natural sand and machine-made sand). The key points of quality inspection are as follows: Particle grading: The particle grading of aggregates is determined by screening tests to ensure that it meets the requirements of relevant standards. Good particle grading can make the aggregates compactly stacked in concrete, reduce the amount of cement used, and improve the strength and durability of concrete. For example, the maximum particle size of coarse aggregates is usually no more than 1/3 of the thickness of the concrete slab, and should meet the requirements of continuous grading. Mud content and mud block content: Excessive mud and mud block content will reduce the bonding force between aggregate and cement paste, affecting the strength and durability of concrete. The mud and mud block content of aggregates are determined by the water washing method. Generally, the mud content of coarse aggregates is required to be no more than 1%, and the mud block content is no more than 0.5%; the mud content of fine aggregates is required to be no more than 3%, and the mud block content is no more than 1%. Robustness: The sodium sulfate solution immersion method is used to test the robustness of aggregates and evaluate their durability under the influence of climate and environmental changes. Aggregates with good robustness can effectively resist the erosion of external factors and extend the service life of concrete pavements. Admixtures can significantly improve the performance of concrete and need to be strictly tested before use: Water reduction rate: The water reduction rate is an important indicator for measuring the performance of water reducers. By comparing the water consumption of concrete mixtures with and without admixtures, the water reduction rate is calculated to ensure that it meets the requirements of the product manual. Generally, the water reduction rate of high-efficiency water reducers should not be less than 15%. Setting time difference: Detect the effect of admixtures on the setting time of concrete. The initial setting time difference and the final setting time difference should meet the construction requirements to avoid abnormal setting time of concrete due to admixtures, which will affect the construction progress and quality. Compressive strength ratio: Determine the compressive strength ratio of concrete with admixtures and benchmark concrete at different ages, evaluate the effect of admixtures on the strength development of concrete, and ensure that admixtures will not reduce the final strength of concrete. The water used for concrete mixing and curing should meet relevant standards and should not contain harmful substances that affect the performance of concrete. The test items include pH value, insoluble matter, soluble matter, chloride, sulfate, etc. For example, it is generally required that the pH value of water used for concrete is not less than 4, and the chloride content (measured in Cl⁻) does not exceed 500mg/L (reinforced concrete) or 1000mg/L (plain concrete). Slump is an important indicator for measuring the fluidity of concrete mixture. At the construction site, a slump cone is used for testing. The concrete mixture is loaded into the slump cone in three layers, and each layer is rammed 25 times. Then the slump cone is lifted vertically to measure the height difference between the cone height and the highest point of the concrete specimen after collapse, which is the slump value. According to the construction requirements, the appropriate slump can ensure the uniformity and density of the concrete during the paving process. For example, when concrete laser leveling machine is used for concrete paving, the slump is generally controlled at 30-50mm to ensure that the concrete can be paved smoothly and can achieve good flatness under the action of the laser leveling machine. For dry and hard concrete mixtures, a Vebe consistency meter is required to detect its Vebe consistency. This indicator reflects the consistency of the concrete mixture under vibration. During the test, the concrete mixture is loaded into the slump cone, and then the slump cone is placed in the container of the Vebe consistency meter. After lifting the slump cone, the vibration table is turned on and the stopwatch is started at the same time. When the concrete surface changes from uneven to flat, the stopwatch is stopped. The recorded time is the Vebe consistency value. The Vebe consistency value should meet the design and construction requirements. Generally, the Vebe consistency of dry hard concrete is between 10-30s. The air content has an important influence on the frost resistance and durability of concrete. The air content of the concrete mixture is tested using an air content meter. The appropriate amount of air content can form tiny bubbles inside the concrete, relieve the stress caused by the freeze-thaw cycle, and improve the frost resistance of the concrete. Generally, the air content of the concrete is required to be controlled between 3% and 5%, and the specific value is determined according to the environment and design requirements of the project. The temperature of the concrete mixture has a significant impact on its performance and construction quality. In a high temperature environment, if the temperature of the concrete mixture is too high, it will accelerate the cement hydration reaction, resulting in too fast slump loss and even false setting; in a low temperature environment, if the temperature of the concrete mixture is too low, it will delay the cement hydration reaction and affect the strength growth of the concrete. Use a thermometer to measure the temperature of the concrete mixture at the mixing site and the pouring site. According to the ambient temperature and construction requirements, take corresponding temperature control measures, such as cooling the raw materials in high temperatures in summer and heating and insulating the concrete in low temperatures in winter. Flatness: The flatness of the base directly affects the thickness uniformity and driving comfort of the concrete pavement. Use a 3m ruler or a flatness meter to detect the flatness of the base surface, and the allowable deviation is generally not more than 10mm. For parts that do not meet the flatness requirements, they should be trimmed to ensure that the base surface is flat, providing a good foundation for the construction of the concrete pavement. Compactness: Insufficient compaction of the base will cause road subsidence and other diseases. The compaction degree of the base layer is tested by sand filling method, water filling method or ring knife method to ensure that it meets the design requirements. For example, for lime-stabilized soil base layer, the compaction degree is generally required to be not less than 95%. Strength: The strength of the base layer is the key to ensuring the bearing capacity of the pavement structure. The strength of the base layer is tested by making specimens for unconfined compressive strength test through on-site core sampling. The strength of the base layer should meet the design requirements to ensure that it can withstand the vehicle load transmitted from the concrete pavement. Casting thickness: During the concrete pouring process, the pouring thickness of the concrete is regularly tested using a steel chisel or other measuring tools to ensure that it meets the design requirements. The thickness deviation of the concrete slab is generally controlled within the range of +10mm, -5mm. Insufficient thickness will affect the bearing capacity and service life of the pavement, while excessive thickness will cause material waste. Vibration quality: Vibration is a key link to ensure the compactness of concrete. The vibration effect can be judged by observing the surface condition of the concrete, such as whether there is slurry overflow and bubble discharge. At the same time, an inserted vibrator can be used to detect the density of the concrete inside to ensure uniform vibration without missing vibration or over-vibration. For concrete pavements constructed with a concrete laser leveling machine, it is necessary to ensure that the concrete has been initially vibrated and compacted before the laser leveling machine is operated to ensure that the laser leveling machine can play a better role and achieve high-precision flatness control. Rebar arrangement (if any): For reinforced concrete pavements, check whether the type, specification, quantity, spacing, position of the steel bars, and the connection method and anchorage length of the steel bars meet the design requirements. Improper steel bar arrangement will affect the structural performance of the concrete pavement, such as bearing capacity and crack resistance. At the construction site, a steel ruler is used to measure the spacing and position of the steel bars, observe the connection and anchorage of the steel bars, and ensure that the quality of the steel bar project meets the standards. 3m ruler method: This is a commonly used road surface flatness detection method. Place a 3m ruler along the longitudinal direction of the road surface and measure the maximum gap between the ruler and the road surface to assess the road surface flatness. Measure 2 locations every 200m, and measure 10 feet continuously at each location. Judge whether the road surface flatness meets the requirements based on the gap value. Generally, the allowable deviation is no more than 5mm. Continuous flatness meter method: This method can continuously measure the road surface flatness, with high detection efficiency and more accurate results. The continuous flatness meter travels along the road surface, collects the elevation data of the road surface through sensors, and calculates the flatness index (such as the International Roughness Index IRI). After the concrete pavement construction is completed, this method can be used to conduct a comprehensive inspection of the road surface to provide detailed data for road surface quality assessment. For roads constructed with concrete laser leveling machines, the continuous flatness meter test results can intuitively reflect the construction effect of the laser leveling machine. The IRI value should generally be controlled within a certain range, such as no more than 2.0m/km, to ensure that the road surface has good driving comfort. Vehicle-mounted bump accumulation meter method: The bumpiness of the road surface is measured by the bumpiness of the vehicle when it is driving on the road. The vertical vibration acceleration of the vehicle is measured by a sensor installed on the vehicle, and the bump accumulation value (VBI) is converted. This method has a fast detection speed and is suitable for rapid detection of large-area road surface flatness. When conducting quality inspection on concrete pavement, the road surface flatness condition can be evaluated according to the VBI value, and verified with other detection methods to fully grasp the road surface quality. Structural depth: The structural depth reflects the macro texture depth of the road surface and has an important impact on the road surface skid resistance. The road surface structural depth is detected by sand spreading method or laser structural depth meter. The sand spreading method is to spread a certain amount of standard sand on the road surface, flatten the sand into a circle with a push plate, measure the coverage area of the sand, and calculate the structural depth value. The laser structural depth meter uses laser scanning technology to quickly measure the road surface structural depth. Generally, the structural depth of cement concrete pavement is required to be between 0.7 and 1.1mm to ensure that the road surface still has sufficient skid resistance under adverse conditions such as moisture. Friction coefficient: The friction coefficient is a direct indicator of the road surface skid resistance. Use a pendulum friction meter or a dynamic friction coefficient tester to detect the road surface friction coefficient. The pendulum friction meter measures the friction force of the pendulum sliding on the road surface when it swings freely from a certain height, and calculates the friction coefficient of the road surface (BPN value). The dynamic friction coefficient tester simulates the friction between the tire and the road surface during vehicle driving and measures the friction coefficient in real time. According to different road grades and usage requirements, the road friction coefficient should reach the corresponding standard value. For example, the BPN value of general urban roads should not be less than 45 to ensure driving safety. Core drilling method: The core drilling method is the most direct and reliable method to detect the strength of concrete pavement. After the concrete pavement is hardened, a core drill is used to drill a core sample on the pavement. The diameter of the core sample is generally not less than 100mm and not less than 3 times the maximum particle size of the aggregate. After the core sample is processed into a standard test piece, a compressive strength test is carried out, and the strength of the concrete pavement is evaluated based on the test results. The core drilling position should be representative, and at least 1 core sample should be drilled every 3km for each lane. The compressive strength of the core sample should meet the design requirements. For example, for a concrete pavement with a design strength grade of C30, the average compressive strength of the core sample should not be less than 30MPa, and the minimum value should not be less than 25.5MPa. Rebound method: The rebound method is a non-destructive detection method. The rebound value of the concrete surface is detected by a rebound hammer. The strength of the concrete is estimated based on the correlation between the rebound value and the concrete strength. When using the rebound method, the measurement areas should be evenly arranged on the pavement. The area of each measurement area should not be greater than 0.04m², and the number of measurement areas should not be less than 10. At the same time, the influence of the carbonization depth of concrete on the rebound value should be considered and necessary corrections should be made. The detection results of the rebound method have certain limitations. It is generally used as an auxiliary detection method of the core drilling method for the preliminary evaluation of the strength of large-area concrete pavements. Ultrasonic rebound comprehensive method: This method combines the advantages of the ultrasonic method and the rebound method. By measuring the ultrasonic sound velocity and rebound value of concrete, the strength of concrete is comprehensively estimated. Ultrasonic sound velocity reflects the density and uniformity of concrete, and the rebound value reflects the hardness of concrete surface. The combination of the two can more accurately evaluate the strength of concrete. The ultrasonic rebound comprehensive method is suitable for batch testing of concrete pavement strength. The accuracy of the test results is relatively high, but the operation is relatively complex and requires professional testing equipment and technicians. Core drilling method: The drilled core sample can not only be used for strength testing, but also can intuitively measure the thickness of the concrete pavement. Use a caliper to measure the thickness of the core sample with an accuracy of 0.1mm. Drill sample cores at 2 locations on the left and right within every 100m of pavement paving width to test the thickness of the board. The pavement thickness deviation should meet the design requirements, and the general allowable deviation is +10mm, -5mm. Radar detection method: Use ground penetrating radar to emit high-frequency electromagnetic waves to the pavement, and detect the thickness of the concrete pavement based on the reflection characteristics of the electromagnetic waves at the interface of different media (such as concrete and base). The radar detection method has the advantages of fast, non-destructive, and continuous detection, and can obtain thickness data of large-area pavements in a short time. However, this method requires professional radar equipment and data analysis software, and the detection results are greatly affected by factors such as the material properties and water content of the pavement structure layer, and calibration and verification are required before use. Appearance inspection: Observe the surface of the concrete pavement with the naked eye to check whether there are cracks. Record the location, direction, length, width and other information of the cracks. For cracks with smaller width, a crack observation instrument can be used to measure and accurately measure the crack width. Generally, cracks with a width of no more than 0.2mm are considered to be small cracks and can be closed on the surface; cracks with a width of more than 0.2mm need to analyze the cause and take corresponding repair measures, such as grouting repair. Non-destructive testing technology: In addition to appearance inspection, non-destructive testing equipment such as ultrasonic flaw detectors and infrared thermal imagers can also be used to detect whether there are cracks inside the concrete pavement. The ultrasonic flaw detector transmits and receives ultrasonic waves, and judges whether there are defects and cracks inside according to the reflection and refraction characteristics of ultrasonic waves when propagating inside the concrete. The infrared thermal imager uses the difference in temperature distribution on the surface of the object to detect internal defects. When there are cracks inside the concrete, a corresponding temperature abnormality area will be formed on the surface, which can be intuitively displayed through infrared thermal images. Non-destructive testing technology can detect hidden cracks inside the pavement, provide a basis for timely prevention and control measures, and ensure the integrity and safety of the pavement structure.Read More


