What are the technical parameters of the concrete power trowel machine?

Even the best laser levelers will likely age or even become scrapped as they age or are used more and more, or due to improper maintenance, untimely after-sales service from the manufacturer, and other factors. Faced with such machines, many construction units usually abandon them, not knowing that many manufacturers have launched activities such as "recycling old machines at high prices and exchanging old for new". For scrapped laser levelers, customers can participate in the above activities in the following ways. ● Sell the idle laser levelers directly, and the manufacturers will recycle them at a high price For the idle and aging scrapped laser levelers in your hands, it may be due to the large amount of engineering, long service life, old software system, or replacement with a newer or larger laser leveler, or the transformation of the industry and no longer direct concrete paving construction, and no longer intend to reuse the original idle laser levelers. As long as the laser system is intact, it can be sold directly to manufacturers with "old for new" activities. They will definitely conduct professional evaluation of your equipment and help you realize cash. ● Repair and refurbish the laser leveler in your hands, and the manufacturer provides you with remanufacturing services At the end of the year, many construction units will sort out the construction equipment in their hands after they are idle, in preparation for the construction next year. They hope to reuse the idle and aging laser levelers in their hands, but they often do not have professional skills and cannot repair them. The cost of purchasing a new machine is too high. At this time, you can contact the manufacturer of "old machine recycling at a high price" to remanufacture your laser leveler. In addition to solving the problems of your current equipment and replacing damaged parts, you can also use your own technical advantages to upgrade and transform your equipment software system to "turn waste into treasure". ● Replace the scrapped equipment in your hands with a new machine, and the manufacturer provides "old for new" service As a precision equipment, some friends ignored the after-sales service, brand technology, product quality and other factors when they bought the laser leveler. They often bought low-quality products without after-sales service because they only wanted to be "cheap" for a while. Although there are concrete paving projects in hand, they cannot be used normally due to problems with the equipment or the manufacturer has not provided systematic and professional training to the operator. I want to buy a product with higher intelligence, guaranteed service and excellent quality, but due to financial pressure, I can't buy it for the time being. In order to meet the needs of such friends, we carry out the "old for new" service, conduct replacement evaluation, and replace the new intelligent laser leveling machine after making up the price difference. After the laser leveling machine has been used for a long time, it will inevitably be idle or scrapped, but as long as we handle it reasonably, we can successfully turn waste into treasure and obtain unexpected benefits. Therefore, if the laser leveling machine in your hand has become old or scrapped, do not discard it at will. You can contact the manufacturer with recycling activities to let the equipment "turn waste into treasure".

    Combining the product line of Vanse Machinery and the typical characteristics of large warehouses (large area, long span, and high flatness requirements), we can conduct the selection and categorization from the following three aspects: Large warehouses are typically divided into "open areas" and "inter-column areas". According to Vanse Machinery's products, the selection suggestions are as follows: Applicable scenarios: Main areas of the warehouse, projects with a daily construction volume exceeding 2000 square meters. Vanse corresponding model: Similar to YZ30-4E or YZ40-4 and other large-sized machines. Reasons for selection: * Extremely efficient: These types of machines are usually equipped with a leveling head that is up to 4-6 meters long, covering a large area at one time. Advantages of telescopic arm: Telescopic arm models (such as those with rotatable/extendable machine heads) can complete large-scale laying without moving, reducing the damage to the base layer caused by the repeated tire pressing on the concrete. This is crucial for ensuring a **superflat floor**. High power: Large warehouses typically use high-strength, low-slump concrete. The vibration frequency and weight of large machinery can better compact the concrete. Applicable scenarios: Warehouses with many columns, construction of second floor floor slabs, parking lots. Corresponding models for Vanse: YZ25-4 or YZ28-4S. Reasons for Selection: Small turning radius: When the internal column grid of the warehouse is dense, large machines cannot turn around, but medium-sized machines can perform flexible operations around the columns. Light weight: If the warehouse is a multi-story structure, the floor load-bearing capacity of floors above the second floor is limited. Medium-sized machines are safer and more convenient for crane transportation. Applicable scenarios: Doorways, corners, auxiliary edge trimming. Vanse corresponding model: DZ25-2. Reasons for selection: As a supplementary means of transportation, it can access areas that large machinery cannot reach, ensuring uniform quality throughout the entire venue. When viewing the specific models on the official website of Vanse Machinery, please pay special attention to comparing the following parameters Leveling width and depth: Large warehouses require as few construction joints as possible. The model with a leveling head width of 2.5m – 3.0m or more should be preferred to reduce the number of trips. Laser system compatibility: Confirm whether an imported (such as American Trimble or Leica) laser control system is equipped. Large warehouses have strict requirements for FF/FL values, and the sensitivity of the laser system is the core. Vibration frequency: The ideal frequency should be between 3000 and 4000 rpm. High-frequency vibration can ensure the compactness of the warehouse floor and prevent the ground from cracking due to frequent forklift operations in the future. Turning method: Does it have the "four-wheel steering" or "crab walking" mode? This is very practical when operating in the corner of the warehouse. Based on the equipment characteristics of Vanse Machinery, we suggest that you ask the salesperson the following three questions when making a purchase: Question 1: Do you support the upgrade of the 3D slope detection system? If your warehouse has outdoor loading/unloading platforms (requiring drainage slope), the machine must be compatible with the 3D control system; otherwise, it can only operate on a horizontal plane. Question 2: Tire configuration. During warehouse construction, double-layer steel mesh is often used. It is recommended to choose solid puncture-resistant vacuum tires or wide tires with anti-slip function to avoid slipping on the steel mesh and affecting the flatness. Question 3: After-sales service and spare parts supply. The construction period of the large warehouse is extremely tight, and the loss will be huge if the machines are shut down. When choosing a domestic major brand like Vanse, it is necessary to confirm its response speed for maintenance in the region and the inventory of key vulnerable parts (such as sensor cables and filter elements). For a standard logistics warehouse with an area of over 20,000 square meters: Main machine: 1 unit YZ30-4 (large vehicle telescopic arm type), responsible for 80% of the large-scale laying work. Auxiliary machine: 1 unit YZ25-4 (medium-sized vehicle-mounted type), responsible for areas between columns and narrow corridors. Cutting machine: 1 unit DZ25-2 (hand-held type), responsible for handling leftover materials.   This "large + small" configuration is currently the most mature commercial construction combination for customers of Vanse Machinery   Note: The parameters provided in this document are for reference only and are not mandatory. Due to differences in technical characteristics between different brands and models of laser levelers, please consult the manufacturer for a suitable solution before actual operation. This reference document assumes no responsibility for any issues arising from failure to follow the manufacturer's instructions.    

Recently lying storms throughout our country, the rainy season comes laser screed  machine maintenance has become very important, the rainy season concrete ground  outside can not be constructed, in the concrete laser flatflating machine idle, should be  placed in a dry place, to avoid the air humidity and affect the engine start. In addition, the construction environment of the concrete laser flattening machine is not  very good, after the rain will have a lot of potholes and puddles of mud accumulation, the first thing to pay attention to after the rainy season is the cleaning of the laser flatflater, of course, not only the rainy season, usually after the use of laser flatflating machine should  also be cleaned in time, Failure to do so can lead to the laser leveling machine walking track  under the gap in the accumulation of sludge, is a place where moisture is hidden, but also  most likely to cause the track rust. The acidic composition in the rainhast water has a strong corrosive effect on the paint surface of the laser screed machine, and over time it will cause damage to the paint surface of the laser flattener, so in the season with more rain, it is best to give the laser leveling machine a paint finish. The simplest is waxing, the longer and more effective is to seal the glaze. No matter what method, All to the laser leveling machine put on a protective coat, to prevent the paint surface fade aging. The chassis of the laser screed is the closest to the ground, especially affected by road conditions, this part is most prone to rust spots, the wheel shell may even loosen perforation. Therefore, we must pay attention to the laser leveling machine chassis clean rust treatment. Rainy days, such as encountering indoor construction, laser screed machine engine is not easy to start the problem, sometimes even if forced to start up, but also has air power. The most likely is a leakage due to moisture in the ignition system, which loses its normal ignition function. Once found that because of the moisture of the ignition system caused bad ignition, engine performance, it is best to use dry paper towels or dry cloth to the inside and outside of the cable and wire drying, and then use a special desiccant spray can to spray the dryer in the split disk cap, battery connector, line connector, high-voltage line, etc. , and so on after a while can start the engine